Home > Shop > Frame Sliders > Kawasaki > Z125 / Z400 / Z500 / Z650 / Z750 / Z800 / Z900 / Z1000 >

2013 - 2016 Kawasaki Z800 No Cut Frame Front Axle Sliders Case Covers Spools
T-Rex Racing 2013 - 2016 Kawasaki Z800 No Cut Frame Front Axle Sliders Case Covers Spools
 
Alternative Views:
Part Number: N242-16 + N242-16F + N242-16C + N242-16SA
Our Price: $359.95

Quantity in Stock:17

Free Shipping
Availability:: Usually Ships in 24 to 48 Hours
Qty:

Description
 
  • Condition: New
  • Special feature: Brackets are designed NOT to rotate in a low side
  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum
  • NO CUT or plastic fairing modifications required
  • Fit Models: Kawasaki
  • 2013 - 2016 Z800
This purchase is for a set of frame sliders, case covers, spool adapters, and front axle sliders for the above bike model. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The brackets have two attachment points preventing them from rotating in the event of a low side. For this model, normal spools will damage the stock exhaust because the spool mounts are located too close to the exhausts. We designed our adapters to offset the spools 100mm rearwards and 15mm downward preventing the spools from potentially damaging the expensive bike exhaust canister. In addition, they allow you to use either GP type or spool type stands. The material of the sliders, spools, and case cover is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »