Home > Shop > Single Sided Swingarm Stands >

Gold Single Sided Swing Arm Stand with Pin(s)
T-Rex Racing Gold Galvanized Single Sided Stand with Pin
 
Alternative Views:
Part Number: Gold SSS + Pin(s)
Our Price: $214.95


Free Shipping
Availability:: Usually Ships in 1 to 2 Business Days


Single Sided Swingarm Pins*:

Qty:  
Description
 
  • Condition: New
  • Special feature: Reversible stand, extra pin slot
  • Size: 1 5/8" in diameter tube
  • Thickness: 1/8"
  • Material: Carbon steel tube (grade 2)
  • Finishes: Gold Galvanized
This purchase is for a single sided swing arm stand that comes with the selected pin(s). The upright twin tubing provides unbeatable strength. The threaded rod is inserted through the axle hole to the other side of the wheel. The over-sized washer and the butterfly nut are attached onto the rod to prevent bike from sliding off the stand as the wheel spins. Long handle bar gives extra leverage and can be reversed to forward direction. Ball bearing pins allow the rear wheel spin easily while being lifted. The center wheel-stop rod prevents the rear wheel from spinning during removal. The stand was cleansed in chemical bath, stabilized zinc phosphate coating and finally finished with black electrostatic powder coat to prevent it from the elemental degradation. The stand requires a simple bolt on assembly.
Pin # Pin Size (mm) Compatibility
Set Pin 1 25.7 Ducati 748 / 848 / 916 / 996 / 998 / Monster 796 / S4R / 1100 / Multistrada 1000 / Hypermotard 1100
Pin 2 29.7
Pin 3 28.3 Honda VFR800 / Hawk GT ( NT650)
Set Pin 4 27.7 1997 - 2006 Triumph T509 Speed Triple / Daytona T595 / Daytona T955i / T955i Speed Triple / 1050 Speed Triple
Pin 5 29.7
Pin 6 42.5 MV Agusta F3 / F4 / F4RR / Brutale / Turismo Veloce
Pin 7 40.5 Ducati 1098 / 1198 / S / 1199 / 1299 Panigale / Streetfighter S / Diavel / Multistrada 1200
Pin 8 53.5 BMW R nineT / K1300S / K1200S / K1200R / R 12 / R 12 nineT / R1200S / R1200R / R1200GS / HP2 Enduro
Set Pin 12 27.2 2007 - ON Triumph Speed Triple 1050 / Daytona T955i
Pin 13 28.7
Set Pin 14 27.7 KTM 1290 Superduke / GT / R
Pin 15 42.7
Pin 16 24.8 Kawasaki H2 / H2R / SX

Please note that these are just the few bikes that we have confirmed ourselves. If you do not see your bike listed, measure your swing arm axle and choose the size slightly smaller than that. Do not select the same size pin as it will not fit! Let us know if the closest option is still not available.


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  1 of 1 people found the following review helpful:
 
5 of 5 Great heavy duty stand! September 22, 2020
Reviewer: Randy from PA  
Super nice stand for my Super Duke, This is a heavy duty unit.  I have no worries having my expensive bike up on this stand at all.  Stand is switchable for both fore and aft handle orientation for BOTH sides with adapters for both sides of the axle included.  I and very happy with this stand and will be purchasing T-Rex stands for my other bikes.  I also love that this is a US product. Shipping was prompt and very well packaged.  This product is leagues above the cheaper stands in strength, fit, and finish.  Some may not like the weight of this stand, but I do because it's basically overbuilt and is not going to fail on me.  5 stars!

Was this review helpful to you?