Home > Shop > Frame Sliders > Suzuki > GSX-R600 / GSX-R750 / GSX-R1000 >

2017 - 2020 Suzuki GSX-R1000 GSX-R1000R No Cut Frame Front Rear Quick Axle Sliders Case Covers Fender Eliminator
T-Rex Racing 2017 Suzuki GSX-R1000 GSX-R1000R No Cut Frame Front Rear Quick Release Axle Sliders Case Covers Fender Eliminator
 
Alternative Views:
Part Number: N59-17 + N59-17C + N59-17FQ + N59-17RQ + N59-17FE
Our Price: $449.95

Quantity in Stock:(Out of Stock)

Free Shipping
Availability:: Usually Ships in 24 to 48 Hours


Aluminum Insert Color*:

Qty:  
Description
 
  • Condition: New
  • Special feature: Aluminum inserts to prolong the life of the pucks, LED license plate light kit included, CNC precision cut cover to close exposed hole from stock fender
  • Material: UHMW-PE (ultra high molecular weight polyethylene), High Strength Neodymium Magnets, aircraft grade aluminum
  • NO CUT or plastic fairings modification required
  • Fit Models: Suzuki
  • 2017 - 2020 GSX-R1000 / R
  • Fitting Difficulty (1-5): 3 - Average (1 - easy / 5 - Little bit of skill)
  • Fitting Time: 120 - 150 minutes
  • PDF Instruction: Frame Sliders
This purchase is for a set of frame sliders, front & rear axle sliders, engine case covers, and fender eliminator for the above bike model. The sliders feature a new design of a complete solid puck with aluminum inserts to prolong the puck life. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The fender eliminator is designed to keep out unwanted debris, dirt, mud, and etc. This kit also allows the use of the stock signal lights. Our axle sliders allows one to quickly remove the axle sliders without removing any bolts or screws like those in a typical slider. It facilitates quick removal of the front or rear wheel. It is an essential convenience at the track where you can promptly raise your bike as soon as you pull in a paddock. The two sides of the axle sliders are attached by high strength Neodymium magnets.The material of the pucks and covers are made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »