 |
- Condition: New
- Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum
- No cut or fairing modifications required
- Fit Models: Honda
- 2013 - 2018 CBR500R / CB500F / CB500X / CBR500R
- Fitting Difficulty (1-5): 2 - Average (1 - easy / 5 - Little bit of skill)
- Fitting Time: 15 - 30 minutes
- PDF Instruction:
This purchase is for a set of spool adapters for the above models. Lifting the rear of a CB500F, CBR500R and CB500X is uniquely challenging. The swing-arms have no threaded holes for spools and are at an angle. Without spools the bike can be difficult to lift with a stand. Once lifted, it can be unstable. The angle on the swing-arms makes it worse. It can cause the bike to slip off the stand and fall. T-Rex spool adapters are made to meet this challenge. They are designed to securely attach to the swing-arms and allow safe lifting of the rear wheel using a paddock stand. Other manufactures' spool adapters will also allow you to lift the bike but will not allow you to remove the wheel. This is because their spools are attached to the chain adjuster blocks and they will come off as the wheel removed. Our spool adapters attach to the swing-arm tubing. The aluminum brackets are lined with UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength and wear resistance. This plastic keeps the aluminum brackets from scratching the swing-arms. The spools are made of UHMW-PE.
|
|
|
Does what you need 
