Home > Shop > Frame Sliders > Ducati > Panigale 899 / 959 / 1199 / 1299 / V2 / V4 >

2013 - 2015 Ducati Panigale 899 / S No Cut Frame Front & Rear Axle Sliders Spools
T-Rex Racing 2013 - 2015 Ducati Panigale 899 / S No Cut Frame Front & Rear Axle Sliders Spools
 
Alternative Views:
Part Number: N80-14 + N80-14R + N80-7F + BlaPlaSpool6
Our Price: $259.95


Free Shipping
Availability:: Usually Ships in 1 to 2 Business Days


Puck Text Color*:

Qty:  
Description
 
  • Condition: New
  • Special feature: Brackets are designed NOT to rotate in the event of a low side
  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum, steel
  • No cut or plastic fairing modifications required
  • Fit Models: Ducati
  • 2010 - 2014 Panigale 899 / S / R
This purchase is for a complete protection kit for the above bike model which includes a pair of frame sliders and front & rear axle sliders. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The left side bracket has four attachment points preventing it from rotating in the event of a low side. For the right side, we have designed a custom case slider to protect the bikes expensive clutch. The front axle sliders are designed to minimize damage to the front forks in a low-side. The rear axle sliders provide an indispensable protection for your beautiful expensive swing-arm. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »