Shop by ride

SUBMIT

Home > Shop > Frame Sliders > Aprilia > RSV1000 / RSV4 / RSV4R / Tuono 1000 / Tuono V4 >

Aprilia RSV4 / Tuono V4 No Cut Frame Front & Rear Axle Sliders Case Covers

Alternative Views:

Part Number: N90-13 + N90-9C + N80F + N90-12R

Our Price: $334.95

Availability:: Usually Ships in 24 to 48 Hours

Aluminum Insert Color*:

Qty:

Description

Condition: New
Special feature: Brackets are designed NOT to rotate on a low side
Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum
No cut or plastic fairing modifications required
Fit Models: Aprilia
2009 - 2016 RSV4
2011 - 2016 Tuono V4
2017 - 2022 Tuono V4 1100 / Factory (will need to remove plastic case cover if you want to use our engine case covers)

This purchase is for a set of frame sliders, front and rear axle sliders, and case covers for the above bike model. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The brackets have two attachment points preventing them from rotating in the event of a low side. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »