Shop by ride

SUBMIT

Home > Shop > Frame Sliders > Kawasaki > Ninja 650 / 650R / Z7 Hybrid / 1000 / H2 / H2R / Z H2 >

2009 - 2011 Kawasaki Ninja 650R No Cut Frame Sliders

Alternative Views:

Part Number: N54-9

Our Price: $134.95

Quantity in Stock:20

Availability:: Usually Ships in 1 to 2 Business Days

Qty:

Description

Condition: New
Material: UHMW-PE (ultra high molecular weight polyethylene), Aluminum
No cut or plastic fairing modifications required
Fit Models: Kawasaki
2009 - 2011 Ninja 650R

This purchase is for a set of frame sliders for the above bike model. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The brackets are bolted to the engine mount and the aluminum spacer is bolted to the bracket. The slider puck is then screwed on to the spacer. The brackets have two attachment points preventing them from rotating in the event of a low side. The puck material are made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for slider since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Average Rating: Average Rating: 5 of 5

5 of 5 Total Reviews: 4 Write a review »

0 of 0 people found the following review helpful:

Super Secure, well built in USA!	September 27, 2024
Reviewer: Diddy from California

Compared to many other no-cut products which only have 1 solid attachment point, this system is great in that it attaches at 2 points on each side at the bottom and then has a bar up top. It is also affordable and ships fast - made here in the USA!

Was this review helpful to you?

0 of 0 people found the following review helpful:

Really well made frame sliders	December 27, 2022
Reviewer: Jared morin from central, SC United States

After a lot of research, I came across these. I was looking for some thing, extremely sturdy something that would bend and provide ample protection. I purchased these, and when I got them, they seem to be made extremely well, all parts fit easily. I am very happy with them.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Great Frame Sliders	August 28, 2021
Reviewer: Evan from New Hampshire

I have had to use these a few times over the past 6 years unfortunately and they work great. The latest, was slamming on my brakes with my wheel turned because someone was coming at me in the wrong lane while I was pulling out (long story). In any case no ABS and all the weight transferred to the front and with the wheel turned it just leaned over. Amazingly I only had a small basically unnoticeable scratch on the end of my mirror. The bodywork was completely untouched and I am pretty meticulous with my bike. Absolutely worth it for this one instance alone. I would recommend them.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Frame Sliders	July 29, 2020
Reviewer: Joe Henderson from North Idaho

These are really good sliders, luckily have not got to test them, hopefully never have to, but I would buy these again. Was a small glitch with order didn't recieve all peices, but customer sales rep made it right. The quality of these gave me enough confidence to order a stand set.

Was this review helpful to you?