Home > Suzuki > GSXR1300 Hayabusa > 2008 - 2020 >

2008 - 2020 Suzuki GSX1300R Hayabusa No Cut Frame Front Rear Axle Sliders Case Cover Spools
T-Rex Racing 2008 - 2020 Suzuki GSX1300R Hayabusa No Cut Frame Front Rear Axle Sliders Case Cover Spools
 
Alternative Views:
Part Number: N60-8 + N60-8CC + N59-9R + N59-9F +BlaPlaSpools8
Our Price: $299.95


Free Shipping
Availability:: Usually Ships in 24 to 48 Hours


Puck Text Color*:

Qty:  
Description
 
  • Condition: New
  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum brackets finished in black anodizing
  • No cut or plastic fairing modifications required
  • Fit models: Suzuki
  • 2008 - 2020 GSX-R1300R Hayabusa
This purchase is for a pair of frame sliders, front & rear axle sliders, and case cover for the above models. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the aluminum spacer is bolted to the bracket. The slider puck is then screwed on to the spacer. The brackets have two attachment points preventing them from rotating in the event of a low side. The left side brackets wraps around the frame not allowing the bracket to rotate. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. For the front axle sliders the installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. The long bar is made of billet aluminum. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »