Shop by ride

SUBMIT

Home > Shop > Frame Sliders > Kawasaki > Versys 650 / 1000 / Versys-X 300 >

2006 - 2014 Kawasaki ER-6N / Versys 650 No Cut Frame Sliders

Alternative Views:

Part Number: N53-6

Our Price: $99.95

Quantity in Stock:20

Availability:: Usually Ships in 24 to 48 Hours

Qty:

Description

Condition: New
Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum
Special feature: Brackets are designed NOT to rotate in a low side
No cut or plastic fairing modifications required
Fit models: Kawasaki
2006 - 2014 ER-6N / Versys 650

This purchase is for a set of frame sliders for the above models. The sliders feature the new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the aluminum spacer is bolted to the bracket. The slider puck is then screwed on to the spacer. Since this spacer is made of solid billet aluminum there is no need for re-tightening the engine bolt in the long run where you have to do so with a plastic slider as the plastic would gradually give in and therefore making the bolt loose. The puck material is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for slider since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Share your knowledge of this product. Be the first to write a review »