 |
- Condition: New
- Special feature: The pucks are solid and not hollow, made to withstand a greater impact. The steel tubes are designed NOT to rotate in a lowside. Multiple mounting points and replaceable skid plates
- Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum, steel tubing
- Dimensions: Heavy duty tubing with 7/8" in diameter and 1/8" in thickness.
- No cut or plastic fairing modifications required
- Fit Models: Yamaha
- 2006 - 2012 FJR1300A / FJR1300ES
This purchase is for a set of engine and luggage guards for the above bike model. The steel tubing for the engine is bolted to the sub frame of the bike and the slider puck is bolted onto it. Two attachment points preventing them from rotating in the event of a low side. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for luggage guards since it can absorb more impact force onto itself and therefore reduce the impact on the bike. The slider pucks can be inexpensively replaced in case of a low-side. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available on the market.
|
|
|
practical and I like the looks of them. 
